HANGER ASSEMBLIES

INFINITE COMBINATIONS

This interactive tool provides a visual simulation of many of the popular pipe hanger configurations. 
Scroll left or right to choose a combination that will suit your application.

As the market-leading Australian manufacturer of Pipe Supports, we are not limited to these options,
and are happy to assist with special, bespoke solutions.


BEAM ATTACHMENTS

HEMISPHERICAL CUP & WASHER
Threaded rod with AG385 cup and washer.
Allows for 10º swing in all directions.
Ideal for tapered flange or angled beams.

Beam Clamp
AG260 beam clamp assembly
with AG270 threaded rod.

No drilling or hot work required.


Threaded rod supplied separetely.
WELDED BEAM ATTACHMENT - A
AG360 Beam attachment,
utilizing an AG270 threaded rod.
Requires site welding.

WELDED BEAM ATTACHMENT - B
Hanger assembly with AG350 welded lug along
with AG320 clevis & pin and AG270 rod hanger.
Requires site welding.
All components supplied separetely.

WELDED BEAM ATTACHMENT - C
AG370 Beam attachment with load pin
, AG290 forged eye nut and
AG270 threaded rod.
Requires site welding.

Previous
Next

INTERMEDIATE CONNECTION
Turnbuckle for use where adjustment is required. Used in conjunction with AG280 LH/RH drop rod.

Click Here

PIPE CLAMP ATTACHMENTS

2 BOLT PIPE CLAMP & SPADE NUT
This assembly uses a 2 bolt pipe clamp and an AG295 spade nut connecting to the rod (AG270 or AG280), depending on your intermediate connection

2 BOLT PIPE CLAMP WITH EYE NUT
With a 2 bolt pipe clamp, and an AG290 weldless eye nut to connect to the rod (AG270 or AG280), depending on your intermediate connection

CLEVIS CLAMP PIPE HANGER
This assembly option waives the need for a secondary part as the rod connector using an AG250 Clevis Clamp

WELDED PIPE LUG WITH CLEVIS PIN
This assembly option utilizes an AG330 Clevis & Pin, with an AG340 pipe lug, which welds straight on to the pipe.

Ideal for sites where welding is allowed.

3 BOLT PIPE CLAMP WITH EYE NUT
This assembly uses a 2 bolt pipe clamp and an AG295 spade nut connecting to the rod (AG270 or AG280), depending on your intermediate connection

3 BOLT PIPE CLAMP & SPADE NUT
This assembly uses a 2 bolt pipe clamp and an AG295 spade nut connecting to the rod (AG270 or AG280), depending on your intermediate connection

Previous
Next

The articles below might be of interest to you...